Detail
The AHS8 combines the functions of a high-end cable tester and length measurement tester, with the capability to identify link status, link capability, and PoE detection. All of this is in full color and internal memory to save results.
- Displays length measurement for each pair in feet or meters using TDR technology
- Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
- Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
- Link light to identify location on a hub/switch/router port
- Tests ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
- Generates selectable tones on selected pins for use with tone tracers
- Supports up to 8 testing & ID remotes for network & telephone cables
- Supports up to 20 network & coax ID - only mapping remote
- View saved cable tests
- Full color graphical wire-mapping
- Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)
- Multilingual (English, French, Spanish)
Cable testing:
The AHS8 provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, miswires, split pairs, and reverses. The full-featured AHS8 measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin. All of this is displayed in a full color graphical display for easy viewing in any environment. The AHS8 also has the ability to name each cable and save all test results. Cable results can be exported to a computer via micro USB cable for record keeping and printing.
Network - PoE Testing:
The AHS8 enables quick identification of a network drops link capability and current link status. The AHS8 also detects the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. These network tests can also be saved for record keeping and printing.
Applications:
- Measure cable length and length to faults using TDR technology
- Network testing of link capability, link status, and link light
- Test PoE to ensure adequate power for powered devices such as VoIP phones
- Conduct single ended and remote cable tests with display of PASS, wire map, ID, and faults for network & coax cables
- Tone and trace cables
- Locate unlabeled network & coax cables with up to 20 remote identifiers
- Test multiple (up to 8) network & telephone drops with testing & identifier remotes
- Define a cable name for your cable test, save every cable test, export to your computer for record keeping and printing
Kenmerk
- Displays length measurement for each pair in feet or meters using TDR technology
- Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
- Detects and reports current link speed and link capabilities for active Ethernet drops, up to 1 Gbps
- Link light to identify location on a hub/switch/router port
- Tests Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
- Generates selectable tones on selected pins for use with 9001 Tone tracer
- Supports up to 8 testing & ID remotes for network & telephone cables
- Supports up to 20 network & coax ID-only mapping remotes
- Micro USB connector (to export cable reports), RJ45 connector, and Coax connector
- View saved cable tests
- Full color graphical wire-mapping
- High resolution full color graphical display
- Ability to define cable name, save cable tests, and print all results (cable testing & network testing)
- Displays wire map in color per TIA-568A/B color codes, in pin or pair order (configurable)
- Protective silicone holster
- Multilingual (English, French, Spanish)
Specificatie
| Measurement Technology: | Time Domain Reflectometry (TDR) |
| Cable Measurements: | Cable Testing and ID: up to 305m (1000 ft) |
| | Split Pair Detection: 1m (3 ft) to 305m (1,000 ft) |
| | Length Measurement: 0 to 457 m (1,500 ft), ± (5%+1ft) |
| | Supports 8 continuity and ID number remotes (RJ-45) |
| | Supports 20 RJ-45 and 20 F-connector ID only remotes |
| Power over Ethernet: | Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant |
| | Tests for classes and loads cable up to 25.5 wattsPoE |
| | (at class 4) Identifies Mode A or B (pairs with PoE) |
| Active Ethernet: | Indicates advertised speeds of 10/100/1000base-t half or full duplex |
| | Can Link to network at 10/100base-t |
| Maximum Voltage: | Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester.
- RJ Jack: 66 Vdc or 55 Vac
- F-connector: 50 Vdc or Vac |
| Save Test Results: | Stores up to 250 Cable or network tests with user defined names |
| Tone Generation: | Tone Frequencies: 730 Hz and 1440 Hz |
| Languages: | English, French, Spanish |
| Battery Life: | For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
- Operating - 20 hours typical
- Standby - 1.5 years typical (200uA max standby current) |
| Operating altitude: | 3048m (10,000 ft) |
| Operating temperature: | 0 to 50°C (32 to 122°F) |
| Storage temperature: | -30 to 60°C (-22 to +140°F) |
| Humidity: | 10 to 90% non-condensing |
| Enclosure: | High-strength PC/ABS plastic with V0 rating with boot |
| | Withstands 4 foot drop on to concrete |
| Size: | 4.7(H) x 9.15(W) x 17.3(L) cm (1.85”H x 3.6”W x 6.8”L) |
| Weight: | 510gram (1 lb 2 oz) with batteries |
| Goedkeuring: | CE, RoHS and WEEE |
Content
AHS8 DataTelCoax Report 1 Remote 5 ID
AHY5 Set Coax ID Remote 1-5 Data ID Remote 1-5 Verloop F female
AHY8 Data Remote 1 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
RJ12 Cable(2x)
AHV8 Kabel USB naar USB
AHX0 Tas
GB10 Gebruiksaanwijzing
Optie
AHU7 Verloop F female
AHV8 Kabel USB naar USB
AHW3 Kabelset RJ12 1 op 1 aangesloten 20 cm
AHX0 Tas
AHX2 Tas
AHY2 Coax ID Remote 1-20
AHY4 Data ID Remote 1-20
AHY5 Set Coax ID Remote 1-5 Data ID Remote 1-5 Verloop F female
AHY8 Data Remote 1 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHY9 Data Remote 2 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ0 Data Remote 3 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ1 Data Remote 4 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ2 Data Remote 5 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ3 Data Remote 6 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ4 Data Remote 7 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ5 Data Remote 8 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
AHZ6 Data Remote 1-8 AIB0/AIB1/AIB2/AIB3/AIB4/AHS8/AHS9/AHT0/AIE3/AIE4/AIE5
Klik op
CU03 Cursus koper infrastructuur 2 dagen
CU95 Netwerkcertificatie cursus
KO10 Instrumentkoffer medium (105 mm)
Prijs
822,80 € (680,00 € exclusief BTW) per stuk
Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.
Look: 
Like: 
