Content
DT70 Digitale multimeter tang
KH11 K-koppel hittebestendig snoer -40/510
ET07 Draagtas
BF62 Silicone lead set met KrokodilbekNederlandstalige gebruiksaanwijzing
DT70 Digitale multimeter tang
Detail
The DT70 with slim jaw and body is ideal for use in cramped work areas and crowded electrical panels. Capture in-rush current using peak hold mode. The DT70 applications are: Measure flame safety control current, Test start and run capacitors & motors, Measure motor run current and capture peak motor start up and amperage, Measure heat anticipator current, Determine thermocouple voltage, Test line and control voltage, Measure air temperature in ducts, Test for the presense of voltage in circuits without contacting the circuit, Measure temperature differential using relative mode.
Kenmerk
- Measure motor in-rush current andrun current
- Measure temperature differential with relative mode
- Non-contact voltage feature can be used to immediately see if power is being supplied to the 24VAC control circuit of thermostats
- Frequency, Min/Max/Record, Data
- Hold, and Peak Hold
- Up to 40,000 Microfarads to test run and start capacitors 4,000 count display with 41 segment analog bargraph
- ALL THESE PLUS...
- Auto & Manual Ranging
- Low Battery Indicator
- Over Range Indication (“OL”)
- Hi Voltage Indicator(>30V AC/DC)
- Separate Battery/Fuse Compartment
- Low Ohm Range (400V)
- Amps AC Resolution: 0.01A
- VDC/VAC Resolution: 0.1mV
- DCμA measurement(0.01μA resolution)
- Temperature measurement with 0.1 ° resolution
Specificatie
| DC Voltage: | Max Range: 600V |
| Max Resolution: 0.1mV | |
| Basic Accuracy: 0.5% | |
| Jaws: | AC Amps and AC Voltage higher then 24 Volt |
| AC Voltage: | Max Range: 600V |
| Max Resolution: 0.1mV | |
| Basic Accuracy: 1.2% | |
| DC Amps: | N/A |
| DC Microamps: | Max Range: 400uA |
| Max Resolution: 0.01uA | |
| Basic Accuracy: 3% | |
| Jaws: | AC Amps and AC Voltage higher then 24 Volt |
| AC Amps: | Max Range: 400A |
| Max Resolution: 0.1A | |
| Basic Accuracy: 3% | |
| Resistance: | Max Range: 40MΩ |
| Max Resolution: 0.1Ω | |
| Basic Accuracy: 1% | |
| Frequency: | Max Range: 400MHz |
| Max Resolution: 0.1Hz | |
| Basic Accuracy: 1% | |
| Capacitance: | Max Range: 40mF |
| Max Resolution: 0.001nF | |
| Basic Accuracy: 1% | |
| Temperature: | Max Range: 1000°F |
| Max Resolution: 0.1°F | |
| Basic Accuracy: 1% | |
| Non-Contact Voltage (NCV): | 24VAC and above |
| Continuity Buzzer: | <35Ω |
| Diode Test: | 1.5mA Max |
| True RMS Response: | No |
| Peak Hold: | Yes |
| Relative Mode: | Yes |
| Min/Max Record: | Yes |
| Data Hold: | Yes |
| % Total Harmonic Distortion: | No |
| Range Selection: | Auto / Manual |
| Display Type: | 4000 count LCD with analog bargraph |
| Auto Off / Sleep Mode: | Yes |
| Relative Humidity: | 80% non-condensing |
| Operating Temperature: | 32°F to 113°F |
| Storage Temperature: | -4°F to 140°F |
| Battery Type: | 9V (MN1604) |
| Battery Life: | 80hrs typical |
| Dimensions (H x L x W): | 1.3” x 10” x 2.5” |
| Weight: | 365 gram |
| Goedkeuring: | CE, RoHS en WEEE |
Optie
BF68 Deluxe Test lead kit
CA71 Koolstof Monoxide Adapter voor DMM
DA20 Druk adapter -30 tot 500 PSI
LS59 Lijn splitter
Prijs
240,79 € (199,00 € excl. btw) stuk