- BF56 Rubber boot
- GB10 Gebruiksaanwijzing
The BF02 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The BF02 does it automatic. The BF02 applications are: Measure line and control circuit voltages, Measure resistance of motor windings, transformers, and solenoids, Make general AC and DC vlotabe and resistance measurements, Measure the resistance of elements and electric heater cores, Test continuity of wiring, Verify voltage at breakers and outlets, and Use as a back-up meter in your tool box.
| DC Volts: | Maximum Input: 600V Maximum |
| Resolution: 1mV Accuracy: +/-0.5% | |
| AC Volts: | Maximum Input: 600V Maximum |
| Resolution: 1mV Accuracy: +/-1.2% | |
| DC Amps: | N/A |
| AC Amps: | N/A |
| Resistance (Ohms): | Maximum Input: 2KΩ Maximum |
| Resolution: 0.001KΩ Accuracy: +/-0.5% | |
| Frequency: | N/A |
| Capacitance: | N/A |
| Inductance: | N/A |
| Temperature (K-Type Thermocouple): | N/A |
| Continuity: | Audible at less than 100Ω |
| Diode: | N/A |
| Duty Cycle: | N/A |
| True RMS Responding: | No |
| Conductance: | No |
| Pulse Width: | No |
| Data Hold: | Yes |
| Min/Max Record: | No |
| Time Stamp Logging: | No |
| Relative Mode: | No |
| Compare Mode: | No |
| RS-232 Output: | No |
| Process Loop Output: | No |
| Sleep Mode / Auto Off: | No |
| Protective Boot: | Yes (standard) |
| Display Type: | 2000 count LCD |
| Humidity: | 80% non-condensing |
| Battery Type: | 9V Alkaline (NEDA 1604) |
| Battery Life: | 500hrs Typical |
| Overvoltage Category: | CAT III 600V |
| Operating Temperature: | (0°C to 40°C) 32°F to 104°F |
| Storage Temperature: | (-10°C to 50°C) 14°F to 122°F |
| Size: | 187mm x 86mm x 33mm (6” x 3.1” x 1.2”) with boot |
| Weight: | 340gram (12oz with boot) |
| Goedgekeurd: | CE, RoHS en WEEE |